...
If enabled, the Show Logger Reference fields is available and the user can enter the information during the shipment creation process and pair it to a logger. This field is commonly used to describe the location of a logger in a shipment, e.g. pallet number, placement within a container, etc. The information entered into the logger reference field is available in a single shipment view, as well as on the logger placement sheet.
...
Shipment Quality Status
The Shipment Quality Status is a customer configuration for Admin users.
Available options for the configuration is:
Good (auto release), Bad, Undecided
Released (auto release), Partly Released, Rejected, Undecided
Updating the quality status configuration will apply to all shipments inspected after the changed. Updating the configuration will not impact closed shipments.
...
To apply it to the customer configuration, the Admin user must set it in the Account Adminuser interface under SCM Settings in the Supply Chain Monitoring.
...
It is possible to undo changes made by pressing the Undo button as shown on the image below.
...
When an exception occurs, a user must log into the system and manually update the status in the Inspection modal before closing the shipment record, as shown below:
...
Shipment Auto Inspection Options
The Shipment Auto Inspection Options decide which shipments require manual inspection. This configuration determines which excursion severity levels (Low, Medium, High) require a manual inspection of the shipments, and which shipments are closed automatically in the system with the auto release status (Good/Released)status.
The following configurations are available as shown in the table below:
Option | Results |
|---|---|
Any severity level (default) | All shipments require an inspection before being closed. No shipment is closed automatically. |
Low severity level and above | All shipments with excursion severity level Low, Medium, and High require an inspection before being closed. |
Medium severity and above | All shipments with excursion severity level Medium and High require an inspection before being closed. |
High | All shipments with excursion severity level High require an inspection before being closed. |
The Require manual inspection for shipments with field below shows the Medium severity and above option selected.
...
If enabled, a PDF file containing raw data measurements from all loggers assigned to a shipment is delivered with the Shipment Report email as a separate attachment.
| Info |
|---|
|