...
Select the draft shipment that you would like to complete and assign one or more loggers to.
Step 3
Select "ADD LOGGER"
...
Add the logger using the bar code scanner. Alternatively, you can manually select a logger from a list of registered loggers.
Step 5
The green checkmark check mark and logger ID indicates that that the logger has been successfully scanned.
Continue to "Scan reference" and "Scan description" - you can skip this step and add this information manually laterthese fields are optional.
Reference and description will appear in a shipment detail view and on the logger placement sheet for the shipment.
Select
Continue to add loggers to the shipment by selecting "ADD ANOTHER LOGGER" and repeat step 4.
One all loggers have been added select "DONE" once you are finished adding a logger.
Step 6
Logger(s) been successfully added to a shipment.
Step 7
To add more loggers to the shipment, scroll down and select "Add Logger," and repeat Steps 3 through 6 above.
...
To manually add logger reference and description select the added logger and type in corresponding information then "SAVE & CLOSE"
Step
...
8
When you are finishing adding all loggers to the shipment and adding reference information, select "Send to Ready."
Confirm that the shipment should be transitioned to Ready state.
Step
...
9
The shipment is now ready to be started and loggers can now be placed with the product.
Add a batch number to a shipment using SCM App
Step 1
Find and select the draft shipment.
Step 2
Click "ADD BATCH NO"
Step 3
Trigger the scanner using the handheld device and scan the batch number barcode. Alternatively select "ADD MANUALLY" and type in the batch number.
To add more than one batch number, select the green pen icon after successfully scanning the first batch number and select "SAVE & SCAN NEW". Repeat the process until all batch numbers have been scanned.