| Table of Contents |
|---|
...
Product has not been analyzed.
Product is currently being analyzed.
Product analysis is complete. The temperature was within the allowed stability budget. Product status: OK.
...
Product analysis is complete. The allowed stability budget of the product was breached. Product status: Not OK.
Product without stability data. Products indicated with the empty set icon are placed at the bottom of the Products list.
...
The temperature was below 2.0°C for 36 hours and 50 minutes while the allowable budget was zero minutes. The rule that is broken is indicated with red letters and red progress bar (see image below). The broken rule causes the rule group to break which is indicated with a red frame.
...
Example of a product with multiple Temperature rule groups.
...
Freeze-Thaw Cycles
Freeze-Thaw thaw cycles are used for tracking to track how many times the temperature has gone below the freezing point as defined for the product and has gone above the freezing point again.
There are two factors used to determine Product quality based on Freeze-Thaw cycles.
...
Add Products to a shipment
From the Products tab:
Press the Add Product button. The Add Product form will appear.
In the Add Product form, find and select the desired product using the drop-down menu and search by Product name or Product reference.
Fill in the Product reference fields as needed, i.e. Batch, Pallet, SKU, Placement, and Description.
To add custom properties, expand Custom Properties and select Add Property.
Add custom properties as needed by using the Add Property button, and fill in the key and valuefields.
To add more product entries, select Add Entry.
Select Save once all product entries have been added to the shipment.
The product is now added to the shipment.
...
Add Product without Stability Data to a shipment
...
Edit Products in a shipment
From the Products tab:
Select a product from the list of products. This will direct you to the product detail page.
Select the Edit Product button to enter edit mode (see image below).
Edit product information as needed.
Press Save.
The product information is updated.
...
Remove Products from a shipment
From the Products tab:
Select a product from the list of products. This will direct you to the product detail page.
Select the Edit Product button to enter edit mode.
Edit product information as needed.
Press Remove Product.
The product information is removed from the shipment.
...