Admin access

...

Account access

To setup your user account, Controlant Support will email the account provided with a link to the Facility Monitoring User Interface and a temporary login name and a password. If you don´t have this, you should contact Controlant support Please log into the system with the provided account information then change your email and password according to your preference. Contact Controlant Support at support@controlant.comLink  if there is any issue.

Here is a link to the Facility Monitoring User Interface Interface: https://grp.controlant.com/user/login

User your admin access and password to enter the Once you setup your username and password, you can access Controlant's Facility Monitoring Interface.

Hardware Installing

See general hardware installation guidelines 1.3.1 General Wireless Setup

When the the gateway has been plugged to power source and turned ON and the loggers have a connection to the Gateway, you should see measurements in the user interface. Please note, that you will possibly need to wait for 5 minutes until the first measurements can be seen in the user interface. 

Configure preparation

...

Configuration information

Please prepare your facility drawing (map) with device location and the device installation log before programming the device(s) in the User Interface. These are the best practices: 1.3.3 Installation preparation and process.

The device installation log should include.:

• Name of spaces and rooms monitored

  Give the space a name, the name

  : Space which will be used as a Group Name

• Loggers identity, name and

  placement Write down the ID number of the logger and give it a

  placement : Device ID number and name (e.g. Storage 1 - Front)

• Groups

  • Define groups

    i.e. groups of

    - loggers that monitor a defined space

  • Define

    in what

    the group of each

    logger should be in

    logger 

• System Administrator

  • Should be defined in the system when delivered
  UsersDefine users i.e. make a list of names

  : The elected system administrator defined during setup

• Users : Names, emails, mobile numbers and roles, of those using Controlant's system

• Roles

  • Administrator.

    A person that has

    Has full access to the User Interface

     and can

    with the ability to change every parameter in the system.

    His role is to be

    They are responsible for

    the system as a whole

    overall system management.

  • Supervisor.

    A person that has a

    Can view and change their function

    change

    's access to the User Interface.

    His role is to be

    They are responsible for the Facility Monitoring

    i.e. configure

    including managing configuration measurement requirements

    and

    /criteria and

    define persons that

    defining users who will receive

    notification/alert if a logger is out of bounds

    excursion notifications/alerts.

  • Watchman.

    A person who a view

    View-only access to the User Interface.

    His

    Their role is to receive alerts (SMS and emails) if the system/logger goes out of bounds. 
    
    

Configuration

Please read the User Manual for the Facility Monitoring User Interface (FMUI) before you start to configure configuring the system, see . See 1.4 User Interface (FMUI)

Assistance

If you need assistance to sett up your system or consulting, you can always contact Controlant Professional Services see Manuals and Instructions.

Assistance

Here is an overview of Controlant's support options: 1.5.3 Support