Controlant Facility Monitoring system is simple to install in most cases, see challenging installations and Pre-qualification process. When the devices are delivered to customer, they have been defined in the Controlant cloud and are basically ready to use. Controlant support set up one Admin user and sends login information to the relevant person.
Installation can be split into two phases; a) hardware Installation and b) group setup and alarm configuration
It is important to install the devices with care and with respect to high frequency physics. Please read guidelines regarding Wireless Installing carefully, see 1.3.1 General Wireless Setup
...
| Include Page | ||||
|---|---|---|---|---|
|
Controlant Facility Monitoring installation contains two parts: 1) User access (group) setup plus alarm configuration then 2) Hardware installation.
Before the devices arrive for installation, please decide and define who is responsible for monitoring and addressing Controlant system alerts, which alert groups are suitable for your facility, and internal procedures for excursions. Here is an overview of this process: 1.3.5 First steps.
Devices and user manual for the FM user interface (FMUI) can be found in accounts will be programed by the time the device(s) arrive to the facility. Controlant's Support team will set up Admin access and user logins by email. Here is the Facility Monitoring cloud-based platform manual: 1.4 Manuals and Instructions
.
Due to the high frequency of Controlant's wireless devices, installation must be completed according to these guidelines: 1.3.1 General Wireless Setup.