Page Comparison

For each alarm boundary a delay can be selected, i.e. for how long the temperature can be outside the boundary without raising a warning. The delay is accumulated time and does therefore, not reset if logger temperature goes back within set boundary.

The maximum delay is 120 hours and 50 minutes.

Example: If an upper boundary is created that states that temperature should not be above 25°C for 1 hour then an alarm will be triggered once total time out of bounds reaches one hour.

Image Removed

Select custom time interval

1. From the drop down menu select Custom
2. New entry field will appear with the format hh:mm
3. Type in how many hours of delay
4. Use drop down menu to select delay in minutes.

Image Removed

...