For each alarm boundary a delay can be selected, i.e. for how long the temperature can be outside the boundary without raising a warning. The delay is accumulated time and does therefore, not reset if logger temperature goes back within set boundary.
The maximum delay is 180 hours and 50 minutes.
Example: If an upper boundary is created that states that temperature should not be above 25°C for 1 hour then an alarm will be triggered once total time out of bounds reaches one hour.
Select custom time interval
- From the drop down menu select Custom
- New entry field will appear with the format hh:mm
- Type in how many hours of delay
- Use drop down menu to select delay in minutes.
