2. Exchange logger associated with a measuring point

Note

For continuity of measurements, a logger replacing another logger in a re-calibration or warranty process should be associated with the the same measuring point.

In the re-calibration process, the logger that is being replaced and the logger that is replacing the old logger should be placed together in the same conditions for a couple of hours. It is not possible to view the temperature readings of the new logger before it's added to a measuring point

1. In the navigation panel on the left side, select the measuring point that will have the logger associated with it replaced

2. Select the ENTITY SETTINGS in the right corner

3. Select MODIFY from the drop-down menu

NOTE

The ID of the logger currently associated with the measuring point will be highlighted in grey on the list of sensors:

4. Find the ID of the new logger on the list of the sensors and click on it, it will be highlighted in blue

5. Click on SAVE

NOTE

From the moment when the new ID was associated with the measuring point, the temperature data will be logged from a new logger