| Include Page | ||||
|---|---|---|---|---|
|
| Table of Contents |
|---|
Definitions
Name | Description |
|---|---|
Group | A group is a place or a "folder" that contains one or more loggers. The operator of the system can add or remove loggers from groups, similar to files in a folder on a computer. |
Logger | A wireless Controlant logger that measures data and communicates to the Controlant cloud via Gateways |
Gateway | A device that transmits data from loggers to the Controlant cloud |
Logging into the system
To login to the Controlant Facility Monitoring solution
Navigate to www.controlant.com
Choose facility monitoring in the top-right corner of the home-page
Enter username and password
To view terms and conditions click on the link "terms & conditions" below the Login button
Press Login
...
First Login Views
Once a user is logged into the system he will be directed into the groups view. At the top of the view, the user will be shown two main tabs; the Group tab and Devices tab. If the user is defined as an administrator in the system, a Admin tab can be seen.
Group tab will display all groups that the user has access to. By pressing on the group the user will get directed into the group view where he can view specific loggers in that group.
Device tab will display all devices that the user has access to through his groups. In this view, the user can see the status of each device and manage, if he has By pressing on a device, the user will be directed into a view for that logger, where the user can view data on charts and configure warnings.
Admin tab will appear if the user is defined as an administrator. 
...
Group Details
When a user chooses a group, he will be directed into the the group details view.
Once in the group the user will be able to:
View multi-charts [Multichart button], were data from multiple loggers is displayed on a single chart.
Create and subscribe to pdf reports [Reports button]
View incidents (excursions) and create incident reports
View details for loggers, including current measurement, wireless signal strength, historical data
Configure warnings
...
...
The logger overview will show status of all sensors measurements.
With the view, users can:
View data on a chart, by pressing on the measurement value
Add or modify warnings, by pressing on the bell-shaped icon
Renaming the logger and add data-alarms by pressing on the wrench icon
View status of battery and signal strength
...
Icon | Description |
|---|
 | OK - warning is set and values are within limits |
 | Alert - warning is set values are outside of limits |
 | No recipient - warning is set and values within limits, but no recipients |
 | Unknown - warning is set, but logger is not communicating with gateway |
 | Inactive - warning is set, but currently inactive |
 | Off - No warning is set or it has been turned off |
Viewing Data
Multi-Chart
By pressing the Multichart button in the group overview, the user is directed into the charting tool.
...
In this view the user can:
Select which day he wants to view [Time period button]
Choose common measurement types to view [Filter sensors by type drop-down menu]
Add and remove sensors by clicking on the check mark by each sensor or adding a device [+ Add devices]
...
...
Tabular View
While in multi-chart view, a tabular presentation of the data can be activated by choosing the "Table" tab.
...
Downloading Data
By choosing "Download File", a file download will be started for the data in the chart/table. It will be downloaded on a csv file which can be opened in Excel or other similar spreadsheet editors.
...
In this view, the user can:
Sort devices by
Description
ID
Last Data
Groups
Filter devices by
Group Name
No Data arrived for > 15 min
Battery needs replacement
Active devices
Disabled devices
Devices in maintenance
Device information
ID number
Type (Gateway or Logger)
Description
Measured Temperature
Group Name
Battery status
Time since last data transmision
View graph
View device settings
View devices on Multigraph
Set Temperature Warnings to selected number of Loggers
Rename device or warning in selected number of devices
...
...
Device Details
When a user presses the graph icon 
in the logger/gateway line, he gets directed into the logger details view.
In the view, the user can:
View current status measurement status of all loggers
View log measurements from all sensors on on chart
Choose to view extended charts for individual sensors [by pressing the chart icon]
Choose to configure warnings [by pressing the bell shaped icon]
...
...
Changing User Settings
In the top-right corner menu, the user can choose to go to the Settings page.
...
In the settings page the user can do the following:
Change the display language in the interface. Available languages are Icelandic, English (US), English (UK), Danish, Swedish, German and Spanish.
Change the display time-zone
Change Unit of measurement for temperature
Change user password
...
Creating a Report
See: Reports